-40%
Quad-band GSM EDGE Add-on Module, UEXT, USB
$ 18.97
- Description
- Size Guide
Description
Quad-band GSM EDGE Add-on Module, UEXT, USBMOD-GSM-EDGE
MOD-GSM-EDGE is designed for adding remote monitoring and control via GSM cellular network. With this module, any board that has a UEXT connector (see below) can give you access to its features via the GSM network. MOD-GSM-EDGE also can be connected to a PC directly via USB.
MOD-GSM-EDGE features a SIM700D quad-band (850/900/1800/1900 MHz) GSM GPRS/EDGE module, which covers most GSM networks around the world. The SIM700D supports the EDGE protocol which assures faster data transfer. The GSM antenna is built into the board, so there's no need for an expensive external GSM antenna.
This module can work in stand-alone mode also, but only when the SIM card is without PIN code. In stand-alone mode, MOD-GSM-EDGE requires use of AT commands. It can receive information via GSM, but if you want to do anything with this information, you will need to connect it to an appropriate controller board with UEXT. Choose the controller board based on the needs of your application.
UEXT Connector
The UEXT connector provides a solderless way to connect this GSM module to a system with a microcontroller. There are dozens of microcontroller systems and development boards that can connect to this module via UEXT using the supplied cable. Click on the architectures below for lists of compatible boards:
ARM7, ARM9, ARM Cortex
AVR, Arduino
MSP430, CC430
PIC18, PIC32, Pinguino
TMS320
Quad-band GSM EDGE Module Features
battery (not included)
Connector for battery charger
External power connector
SIM-card holder
Mini-USB connector
Status LED
On-GSM module temperature sensor
UEXT connector and cable for attaching module to control board
Power button
On-board DC-DC converter for stand-alone mode and battery recharge
PCB: FR-4, 1 mm (0.039"), solder mask, silkscreen component print
Dimensions: 79.2 × 57.6 mm (3.1182 × 2.268")