00-10604-10 Nitrous Outlet Stinger 2 Plate System Kit 4150 Carb With 10lb Bottle

Description

** This Kit Comes With A Free Nitrous Outlet Tee Shirt. We Will Send An X-Large Shirt With This Order. If You Need A Different Size Please Message Us What Size You Need **
Stinger 2 Standard Wet 4150 Boomerang Nitrous Plate System
Innovation, Part 2:
The Stinger 2 is the only actual upgrade over its predecessor in the hugely successful Stinger Nitrous Plate lineup and is based on the ideology that nitrous plates are not one-size-fits-all. It is designed to saturate the incoming air flow by placing the discharge cone at the top of the intake throat while discharging the nitrous horizontally across the intake plenum in a 360° pattern.
Design
The Stinger 2 is a single-entry nitrous plate that provides a max flow of 634hp. The fuel discharge ports are on top and discharge at a downward angle towards the horizontal nitrous discharge. The nitrous will mix into the air stream allowing the engine vacuum to pull it into the cylinder. This is a perfect plate for intake manifolds that do not have a tall deck height from the top of the runner to the carburetor flange.
Construction:
The 4150 plate and cone are manufactured from 6061 billet aluminum. The nitrous plate is .75” thick and black anodized with engraved Nitrous Outlet logos and Fuel / N2O entry marking. The cone is anodized red and features 16 nitrous discharge holes and 16 fuel discharge holes. Premium gaskets are included as well as Jetting for 50-100-150-200-250-300-350-400-450-500 horsepower shots. We even include fuel jetting for gasoline and E85! This is a standard system and utilizes a .122 nitrous solenoid and .177 fuel solenoid. Custom pre-bent stainless hardlines are included to connect the solenoids to the plate, as is our popular Boomerang Solenoid Bracket.
Application:
The Stinger 2 is designed to saturate the intake plenum with a 360° discharge pattern. We suggest using the Stinger 2 plate with intake manifolds that measure 1 3/4” or less from the top of the intake runner to the carburetor flange.
Quick Overview:
634 HP Max Flow
Single Entry
4150 Flange
360° Discharge Pattern
Precise Atomization
Anodized Billet Aluminum Stinger Plate
Boomerang Solenoid Bracket
Gasket, Jetting and Hardware Included
Nitrous Jetting for 50-500
Fuel Jetting for Gasoline and E85, 5-55psi Fuel Systems
Specs:
10 lb Nitrous Bottle
Wet
System
Hard Lines From Solenoid To Plate
Included Jetting (in Horsepower): 50-500 HP
Main Feed Line Size: -6 AN
Max Flow (Per Stage): 634 HP
Nitrous Solenoid Size: .122 Orfice
Number of Solenoids: 2
Number of Stages: Single Stage
Relay, Harness, Activation Switch & Wide Open Throttle Switch Is Included
Single Stage
Boomerang Solenoid Bracket is Universal Style